How fast does a Mercury 115 Pro XS go?
How fast does a Mercury 115 Pro XS go?
4.8 km/h
Mercury’s Pro XS outboards have a hard-earned a reputation for superior hole shot, top end speed and durability, and the new 115hp Pro XS fits right in. Fastest top speed: Up to 4.8 km/h faster than its nearest competitor.
How much does a 115 horsepower Mercury weigh?
399.00lbs
Specifications
| Type of Engine | 4-Stroke |
|---|---|
| Horse Power | 115 |
| Configuration | In-line |
| Weight | 399.00lbs |
| Fuel Type | Gasoline |
How much does a 115 HP Mercury 4-stroke weight?
THE TRADE-A-BOAT VERDICT Weight is vital when it comes to outboards and the all new Mercury 115 four-stroke weighs in at 165kg, 5kg under that of its 125hp OptiMax stablemate, even with its larger and heavier Command Thrust gearcase.
What is the difference between a Mercury 115 and a 115 Pro XS?
In fact, the new 115 Pro XS is 16 pounds lighter than the 115 OptiMax it replaces, and 18 pounds lighter than the nearest competing 115hp engine. Its 2.1L displacement is higher than that of any competing 115hp engine.
What is the fastest 115 outboard motor?
Yamaha Outboard VF115 V MAX SHO
The Yamaha Outboard VF115 V MAX SHO is the fastest 115-hp four-stroke ever, with a top speed of nearly 51 mph. This 377-pounds outboard is a class leader in torque, top speed and efficiency.
How fast will a Mercury 115 go?
WOT & Best Cruise. All of the boats we studied powered by the Mercury 115 had WOT speeds of 24 mph, except for the smallest and lightest boat which went one mph faster. Most efficient cruising speeds were in the mid teens and all of the boats got from 4.5 to 4.9 mpg at these speeds. Time-to-Plane.
How fast will a 115 hp outboard go?
115 HP. The Yamaha Outboard VF115 V MAX SHO is the fastest 115-hp four-stroke ever, with a top speed of nearly 51 mph. This 377-pounds outboard is a class leader in torque, top speed and efficiency. It’s not only the fastest but also 10 pounds lighter than two-stroke competitor outboards.
How long can you run a boat on muffs?
Tohatsu/Nissan For larger engines, use the flush port or a set of flushing muffs. Water pressure should be set to one-half or more to ensure adequate flow to the intakes. The engine should be run for five to 10 minutes.
What happens if you don’t flush your outboard?
What we find is if you do not flush your motor as per the manufacturer’s specifications you will over time get a build-up of residual salt, and that salt will crystallize in the water flow galleries and being pressed against the alloy structure of the head they will slowly corrode and pit.
How fast will a 115 hp Mercury go?
A 115 Merc FourStroke was hitched to the transom of a Carolina Skiff 218 DLV, producing a top speed of 43.2 mph at 6,000 rpm and 5.4 mpg at optimum cruising speed, getting 27.1 mph at 4 grand, spinning a 21-inch pitch laser II S/S prop.
What is the difference between Mercury 115 and 115 pro?
How fast is a Mercury 115 2 stroke?
WOT & Best Cruise. All of the boats we studied powered by the Mercury 115 had WOT speeds of 24 mph, except for the smallest and lightest boat which went one mph faster. Most efficient cruising speeds were in the mid teens and all of the boats got from 4.5 to 4.9 mpg at these speeds.
How much horsepower does a 115 boat motor have?
Four Strokes Inline 4 / 1.8L / 115 HP This 377-pounds outboard is a class leader in torque, top speed and efficiency.
Can you test an outboard motor out of water?
Step 1: You can test an outboard motor without access to a boat or ocean. Simply mount it to a sturdy platform, place a big bucket underneath it and fill it with water so the propeller is fully submerged. Step 2: Clean out the gas can of old gas and oil mixture because it may be water contaminated.
Can you start a 2 stroke boat motor out of water?
To run your boat motor out of water, start by attaching a hose to your motor’s water intake so you can flush in water, which will avoid damaging the engine. Once the hose is attached, turn on the water faucet. Then, pull the gear shift to neutral and start the engine.
How long can you run an outboard on muffs?
Can you flush an outboard while in the water?
Outboards used in brackish water, or in freshwater that’s silty or muddy, should also be flushed. Flushing is usually an easy procedure, and can often be accomplished with the boat on a trailer or in the water at a dock or mooring.
Which is better Mercury or Yamaha?
If you are interested in going green, then the Yamaha is a great choice. It offers two electric outboard motors, while Mercury currently offers none. If you are interested in a long-lasting warranty, Mercury might be the better choice because you can get an extended warranty for up to eight years.